Our Oversized Metal Cloverleaf Wind Spinner Garden Art is mesmerizing to watch, with its hypnotic, kinetic display. Two clover-shaped pinwheels spin in opposite directions no matter which way the wind blows for a captivating, swirling effect.
Our Oversized Metal Cloverleaf Wind Spinner Garden Art makes wonderful, eye-catching focal point for your backyard, garden, flower bed or patio. Mount it in the ground or place it in an oversized planter. Solid metal with an attractive bronzed finish. Beautiful, unique yard art – makes a great gift!
• Metal cloverleaf wind spinner garden art • Clover-shaped pinwheels spin in opposite directions • Captivating, swirling art-in-motion for yard, garden, flowerbed • Place wind spinner in the ground or in an oversized planter for patio or deck use • Garden and yard art focal point is unique and fun
Size 30" dia. x 28"D x 84"H
Your Recently Viewed Items and Featured Recommendations
Comments about Product: Love this Spinner.... in a mild to moderate breeze. I take it down the minute storms approach and the winds pick up. I fiberfixed the pole where the seams meet and it holds them nice and tight.. use the 2 inch Fiberfix tape! No problems after that!
Comments about Product: The spinner is great and I have had no problem with the welds as others have had. The problem is the pole. I will be ordering my third pole as the threads on the previous poles continue to strip. It would be much better if the pole was one continuous piece and did not screw together. I think the spinner is too heavy for the pole it is on.
Comments about Product: I bought this from QVC. It kept coming apart. We put it back together twice. The second time we printed new directions and were very deliberatly putting it together carefully. It was beautiful while it lasted. Three of the inside blades have broken off and three of the outside blades have broken off. I wil be throwing the remaing part away this week end. It didn't even last a year. Very disappointing. The scale was perfect and the design beautiful but the execution, terrible.
Comments about Product: This was a gift from a person who is obviously not mechanically inclined. She over-paid by about $120, in my opinion.
The spinner has broken three times in less than two months, and although my repair welds hod just fine the factory welds continue to break. I give up, it's headed to the scrap metal recycler.
The first thing to break was the threaded pole, obviously under-sized for the stresses placed on it by the rotating head. The large spinner is not stabilized by the small tail, leaving the spinner to both rotate and spin wildly around the pole in even a breeze.
Although I take the spinner down when the wind gusts are forecast to exceed 15 mph, the welds on the spinning wheels have twice failed and the weld on the axle holding the contraption together has failed.
I give up. It may be a pretty yard decoration in places where the winds consist of gentle breezes but is not suitable for anyplace I can think of.
Comments about Product: So disappointed our awesome Cloverleaf Wind Spinner has lost one of the six blades of the smaller inner fan. This just after 3 months of a few windy days?? We have contacted P&H to see if they would send us a replacement part. This is a great spinner, in fact, our favorite of the four styles we have purchased from P&H. The rating is just because the failed welding.
Comments about Product: So disappointed after having purchased this product, which quickly failed. The weldings of one of the inner spinner blades failed, causing the inner spinner to hit against the main spinner. It's a materials failure caused by poor spot welding of areas of high stress.
Comments about Product: We do not recommend to buy this product. The company does not stand behind their name. We purchased this product and within a week the pole bent over where the threads are to put them together. So my husband bought some heavier poles and then one of the petals came loose from the center of the clover and the company wont replace it cause we altered their pole. So I would not buy anything else from this company!!!!!!!!
Comments about Product: Torn between a thumbs up and a thumbs down. This is a heavy duty item with the exception of the three piece pipe assembly which is too flimsy for the overall product. Pipe pieces have internal threads and use an internal threaded coupler to join the three pipe pieces together. The coupler is just a little too small in diameter to effectively do this and the threads slip (not strip) keeping you from getting a solid connection. In time the weight and torque of the cloverleaf fins will make the pole pieces lose and the pole will then bend at an angle.
Solution was to buy a heavy duty plastic pipe 3/4 inch diameter and 5 foot long from a hardware store and cut off about 4 inches with a steak knife (not the white PVC water pipe). Paint the pole the same color (Automaotive Spray Paint), and slip it over the the retightened pole assembly - looks pretty good. Cost of pipe was 2 dollars, and paint was 7 dollars. Made it all worth while.
Also before assembly you might want to use plumbers Teflon Tape on all the threads to keep them from vibrating loose over time.
I bought three of these Cloverleafs and think I'll repait them Red, White, and Blue...
Overall, with the fix I did I am very happy with the end product.
Oh yeah - you might also want to put a daub of Petrolatum Jelly on the top pole piece to aid in long term easy movement.